Hey guys , am working on an image recognition system that can analyze images of tissue samples, identify malignancies, and predict possible symptoms and causes. The system will utilize a camera sensor for image capture, an ESP32 for processing, and a machine learning model for image analysis. My aim is to set up the ESP32 with the camera module to capture images, How can i interface the camera module with the microcontroller to capture clear images?
Am getting the error
`Camera initialization failed `

Here’s my code
“`c
#include

void setup() {
// Camera configuration
camera_config_t config;
config.ledc_channel = LEDC_CHANNEL_0;
config.ledc_timer = LEDC_TIMER_0;
config.pin_d0 = 5; // Adjust based on your wiring
// Add other pin configurations
config.pixel_format = PIXFORMAT_JPEG;
config.frame_size = FRAMESIZE_QVGA;
config.jpeg_quality = 10;

// Initialize the camera
esp_err_t err = esp_camera_init(&config);
if (err != ESP_OK) {
Serial.println(“Camera initialization failed”);
return;
}
}

void loop() {
camera_fb_t *fb = esp_camera_fb_get();
if (!fb) {
Serial.println(“Camera capture failed”);
return;
}
// Process captured image
esp_camera_fb_return(fb);
}
“`
What can I do?