New DevHeads get a 320-point leaderboard boost when joining the DevHeads IoT Integration Community. In addition to learning and advising, active community leaders are rewarded with community recognition and free tech stuff. Start your Legendary Collaboration now!
Hey guys, During integration testing, I’ve noticed intermittent failures in CAN Bus communication between nodes. Some messages are dropped, and errors are logged on the AVR128DA48. I’ve already checked for electrical noise and verified the hardware setup. I also added the following debug code to catch errors:
if (can_receive(can_dev, &rx_frame, K_MSEC(100)) == -EIO) {
printk("CAN receive errorn");
}
Despite this, the communication still fails occasionally. What further steps can I take to debug and ensure reliable communication on the CAN Bus network, especially with intermittent errors?
You can use an oscilloscope to monitor CAN_H and CAN_L signals for distortion, ringing, or voltage drops. Sometimes also if your power network is not properly grounded, you can receive some garbage message on the system.
one last thing i world say is to use a CAN Bus analyzer. This helps in proper CAN debugging process.
CONTRIBUTE TO THIS THREAD