New DevHeads get a 320-point leaderboard boost when joining the DevHeads IoT Integration Community. In addition to learning and advising, active community leaders are rewarded with community recognition and free tech stuff. Start your Legendary Collaboration now!
Hi Devs,
Recently I got into some RF stuff and planning to build a door lock app – with one device as a remote and another attached to the door controlling a sort of electromechanical system to latch/unlatch the door. I have tried a basic device-device communication, sending a command to open and close the door where on reception of the command from a remote, the node beeps buzzer. Wrote about this here (https://community.element14.com/challenges-projects/project14/sub1ghzband/b/blog/posts/project14-subghz—door-lock-app-part1)
To extend this further, I require some suggestions on system design and implementation plan on how multiple doors can be controlled.
1. A mesh type network between 3 or 4 nodes on the door would be suitable?
2. How the electromechanical side of control can be designed to latch/unlatch the door? (maybe would require an additional power other than onboard)
Let me know if you any ideas on this and probably we can discuss on how to extend this for more other applications and as a product.
2013: The proof of concept prototype for the door latch/unlatch (Bluetooth, WiFi, XBee, RFM95 LoRa Radio 900MHz, RFM96 LoRa Radio 433MHz, RFM12B 433 868 915 MHz) consists of a various components.
What is from 2013, @lucpaquin_82882 ?
Door latch unlalch
Wireless
Electric Door Release Locks ( DC12V )
https://www.maglocks.com/
https://www.electriclock.net/
https://www.intevaproducts.com/
Amazon: electric door latch
Etc…
Power
Wall Power Adapter: 12VDC, 1A, Barrel Jack, Center-Positive
Pololu Adjustable Boost Regulator 4-25V
Etc…
Various components
That helps. I am also looking at some off the shelf low cost solenoid valves.
Thanks @lucpaquin_82882
Solenoid Valves
Amazon Solenoid Valves
https://www.valve-warehouse.net/
https://www.emerson.com/en-us/automation/fluid-control-pneumatics/solenoid-valves
https://www.iqvalves.com/solenoidvalves
https://www.solenoidsolutionsinc.com/
https://ph.parker.com/mx/en/series/solenoid-valves
https://ph.parker.com/mx/en/series/solenoid-valves
Etc…
/* ***** Don Luc Electronics © *****
Software Version Information
Project: Navadeep – Mk01
Navadeep-01
Receive and Send
DL2211Mk06pr.ino
DL2211Mk06ps.ino
2 x Moteino R2 (RFM12B)
1 x Lithium Ion Battery – 1Ah
1 x SparkFun FTDI Basic Breakout – 5V
1 x SparkFun Cerberus USB Cable
*/
DL2310Mk03.zip
@ngu25, courtesy the Don! @lucpaquin_82882!
New_Movie-1.mp4
👍
Great! Thanks for sharing this 🙂
I am porting your example code to the ST platform now. Was going through your portfolio page @lucpaquin_82882 . Very informative content and practical projects. Kudos to you – thanks and keep them coming…
https://www.dfrobot.com/product-1856.html
https://www.dfrobot.com/product-1891.html
@ngu25 Hello sir
I’m goona start making a face recognition door lock using Arduino R4 wifi
Any recommendations how to make it
Hey @bytemaestro. ,
That will be a good project. I used allowed frequency to operate on – to send packets to trigger the door actions. Now that you’re going to use face recognition, how do you plan to implement recognition algorithm?
You can try edge impulse small model face recognition running on R4 wifi.
sir
http://www.linkedin.com/in/muhammad-abubakr-hashim-uxdesignerexpert-electrical-engineer this is my linkedIn so you can check it out
@ngu25
not yet this is what i am asking u also can I program in python beacause the recognation video I am understanding is made in python
@ngu25 which gateway do you use for the stm32wl to access the internet
CONTRIBUTE TO THIS THREAD