New DevHeads get a 320-point leaderboard boost when joining the DevHeads IoT Integration Community. In addition to learning and advising, active community leaders are rewarded with community recognition and free tech stuff. Start your Legendary Collaboration now!
I’m working on a project to control a display using an 8-bit parallel RGB interface with the Nucleo-F411RE, requiring a 1 MHz PCLK. Since the STM32F411RE lacks LTDC peripherals, I […]
Iām interfacing an ESP8266 with an NUCLEO-L073RZ using UART1 `PA9`, `PA10` for communication with the ESP and UART2 for communication with a PC for debugging. I also used a CP2102 […]
I am using the VL53L0X sensor with an STM32F103C8 microcontroller and want to communicate with the sensor directly over I2C without using ST’s library. My goal is to minimize project […]
Good day guys, I need some help in troubleshooting an issue I’m having with accessing the bootloader on a Nucleo L476RG “slave” board? I’m using a Nucleo L496ZG as the […]
Hi everyone, @Middleware & OS I’m struggling to find sufficient material on handling non-atomic operations, and I’d appreciate some guidance. I need to maintain a microsecond count in a 64-bit […]
Alright guys, I need to monitor hall sensors for position encoding with up to 350 changes per second. My current Python program watches GPIO pins but uses too much CPU. […]
Hey guys, a friend of mine is currently working on AT91SAM9M10-EKES. The Code registers IRQ for 2 GPIO pins (PA20 & PA21) but only receives 22/26 expected interrupts (random). Could […]
Hi guys, how can I properly measure the current consumption of the microcontroller on my STM32 Nucleo-64 evaluation board (NUCLEO-L073RZ)? The manual instructs me to remove the JP6/IDD jumper and […]
I am currently utilizing an STM32G431KB board that differs from other boards in the STM32 Nucleo series as it has a wired SWO. While setting up SWV printf on a […]
