Is the ESP32 reliable for 24/7 industrial IoT, or should I use a different chip?

I’m working on an IoT-embedded device with various air quality sensors (CO2, CO, NO, SO2) that connect to the internet using WiFi, GSM, or Ethernet. The device is designed to […]

Best tools for generating UML diagrams from SystemVerilog code for thesis writeup?

I’m working on my thesis writeup and need to document a reasonably complex verification framework written in SystemVerilog. The framework consists of several classes with parameterized types and inheritance relationships. […]

Is Integrating a DLA with a RISC-V Processor a Worthy FYP?

Hi,Devs @Middleware & OS I am currently working on a new project. The project entails how to integrate a DLA and a RISC V processor. However, I have some doubts […]

Transitioning from Artix 7 to Zynq SoC for Image Processing and Storage

I’ve been using FPGAs such as the Artix 7 to read the image data from peripherals and do processing, then display some output using LCD displays connected to FPGA I/O […]

Is it Possible to Use a Power Bank to Charge a 18650 Battery Shield for ESP32?

I have 18650 battery shield with 4x 18650 batteries, that is giving power to my ESP32 and its been working fine. I would need the system to be always working […]

Are There High-Capacity DRAM Modules for FPGAs That Don’t Use CXL Protocols?

Hi Devs, I’m working on a project requiring a large amount of DRAM (similar to SSD capacity) for a single, high-end FPGA. Ideally, I need constant read/write access (24×7) at […]

Need resources for Learning Embedded Systems and CAN Communication with NXP MPC5775B

Hi devs @Middleware & OS , I’m building an application on an NXP board using the MPC5775B microcontroller. The program receives data over CAN, processes it, and then sends it […]

Transitioning from Artix 7 to Zynq SoC for Image Processing and Storage

I’ve been using FPGAs such as the Artix 7 to read the image data from peripherals and do processing, then display some output using LCD displays connected to FPGA I/O […]

Is it Possible to Use a Power Bank to Charge a 18650 Battery Shield for ESP32?

I have 18650 battery shield with 4x 18650 batteries, that is giving power to my ESP32 and its been working fine. I would need the system to be always working […]