New DevHeads get a 320-point leaderboard boost when joining the DevHeads IoT Integration Community. In addition to learning and advising, active community leaders are rewarded with community recognition and free tech stuff. Start your Legendary Collaboration now!
Hey guys, I’m working on a real-time alert system using LoRa to notify operators when a sensor picks up a problem, like high temperatures. I’m using the AVR128DA48 and the […]
Hey guys, During integration testing, I’ve noticed intermittent failures in CAN Bus communication between nodes. Some messages are dropped, and errors are logged on the AVR128DA48. I’ve already checked for […]
I’m working with the BMP280 sensor on an AtMega32 microcontroller, aiming to convert sensor data from raw readings to a human-readable format. Specifically, I need to read calibration values from […]
I am working with an AVR MCU and have encountered an issue with an interrupt routine affecting my LCD display. Specifically, I have an analog potentiometer connected to an analog […]
I’m still on the project tho where I’ve installed a vibration sensor to monitor industrial machinery using an AVR128DA48 microcontroller. While my basic anomaly detection code is functioning, if (vibration_data […]
I’ve integrated temperature, vibration, and pressure sensors with the AVR128DA48, and have set up CAN Bus communication running Zephyr. Each sensor is connected to a separate CAN node, and data […]
I am using AVR128DA48 microcontroller to control an LED in serial communication. The way I set it up is not complex; I’m sending *‘ON’* and *‘OFF’* commands from a `python` […]
Hey guys, I’m using an AVR microcontroller with Zephyr to read data from an ADC via SPI. I’ve configured the SPI peripheral and device tree, but the data coming back […]
I’m trying to implement message prioritization on the CAN Bus for my Smart Industrial Monitoring System. High-priority messages (emergency alerts) should be transmitted before regular sensor data. I’m using the […]
