New DevHeads get a 320-point leaderboard boost when joining the DevHeads IoT Integration Community. In addition to learning and advising, active community leaders are rewarded with community recognition and free tech stuff. Start your Legendary Collaboration now!
hey guys, am developing a real-time industrial control system using a BeagleBone AI with Embedded Linux. The system should read data from an EtherCAT torque sensor. I have verified the […]
@Middleware & OS Gm guy’s, I’m trying to interface an EEPROM with my AVR microcontroller using Zephyr RTOS. I’ve configured the I2C peripheral in the `prj.conf` file and set up […]
@Middleware & OS How can I use the I2C bus(DAC) in kernel space, I have verified that the I2C adapter and address in kernel space, I expected to get a […]
@Middleware & OS hey guys, I am working on an AVR microcontroller project using Zephyr OS for an IoT device that controls motors via CAN Bus/SPI. The initial error I […]
I’ve written the attach class to get the accelerometer and gyro data from the ICM-20948 unit. Unfortunately the data fluctuates massively when I am trying to do a basic calibration. […]
Hello @MCU, MPU & Firmware , Is anyone experienced with Bluetooth HFP (Hands-Free Profile) development? If so, could you provide recommendations for vendors with a mature and stable Bluetooth stack […]
Guys I’m trying to implement the SPI in my stm32 Nucleo l476RG without hal drivers. I have have implemented the spi configuration using spi_init function then when it ready for […]
I am using the Arduino IDE to program an STM32 Blue Pill via an ST-Link V2. After following several manuals, I successfully uploaded the blink example to pin C13.Although I […]
Hey guys while developing a CAN bus monitoring system using the ESP32-S3, ESP-IDF, and RTOS, I encountered a WDT (Watchdog Timer) panic within my CAN interrupt service routine (ISR) when […]
