New DevHeads get a 320-point leaderboard boost when joining the DevHeads IoT Integration Community. In addition to learning and advising, active community leaders are rewarded with community recognition and free tech stuff. Start your Legendary Collaboration now!
I’m working with the BMP280 sensor on an AtMega32 microcontroller, aiming to convert sensor data from raw readings to a human-readable format. Specifically, I need to read calibration values from […]
I am carrying forward my previous work on the *Modbus RTU Function Subset Implementation* based on a *Generic Library*. I had tested this library on *Cypress PSoC5* and *TI Stellaris […]
Guys I’m trying to implement the SPI in my stm32 Nucleo l476RG without hal drivers. I have have implemented the spi configuration using spi_init function then when it ready for […]
Still on my project, I’m trying to implement a real-time data processing feature using Edge Computing on the AVR128DA48. The goal is to perform basic filtering on the sensor data […]
I’m developing an air quality monitoring system on an `STM32F746` using `TinyML`. The system uses a temperature, humidity, and gas sensor to predict the Air Quality Index (AQI) via a […]
I’m still on the project tho where I’ve installed a vibration sensor to monitor industrial machinery using an AVR128DA48 microcontroller. While my basic anomaly detection code is functioning, if (vibration_data […]
I’ve integrated temperature, vibration, and pressure sensors with the AVR128DA48, and have set up CAN Bus communication running Zephyr. Each sensor is connected to a separate CAN node, and data […]
Hey guys while developing a CAN bus monitoring system using the ESP32-S3, ESP-IDF, and RTOS, I encountered a WDT (Watchdog Timer) panic within my CAN interrupt service routine (ISR) when […]
How do I set up and establish communication between the ESP32 and the R307 fingerprint sensor, ensuring that the sensor can be recognized and initialized by the ESP32? My aim […]
