I’m attempting to flash code over CANBUS on a Nucleo-F446 board, using the instructions from the following application note: [CAN Protocol Used in the STM32 Bootloader](https://www.st.com/resource/en/application_note/cd00264321-can-protocol-used-in-the-stm32-bootloader-stmicroelectronics.pdf). According to the document, […]
Hey guys, During integration testing, I’ve noticed intermittent failures in CAN Bus communication between nodes. Some messages are dropped, and errors are logged on the AVR128DA48. I’ve already checked for […]
Hi, I’m experiencing inconsistent Wi-Fi connectivity issues with my ESP32-C3-MINI-1-U board, specifically frequent disconnections (every 10-15 minutes) and slow reconnection times, which persist across different networks and environments, including home, […]
I’m working with the BMP280 sensor on an AtMega32 microcontroller, aiming to convert sensor data from raw readings to a human-readable format. Specifically, I need to read calibration values from […]
I am carrying forward my previous work on the *Modbus RTU Function Subset Implementation* based on a *Generic Library*. I had tested this library on *Cypress PSoC5* and *TI Stellaris […]
Still on my project, I’m trying to implement a real-time data processing feature using Edge Computing on the AVR128DA48. The goal is to perform basic filtering on the sensor data […]
I’m developing an air quality monitoring system on an `STM32F746` using `TinyML`. The system uses a temperature, humidity, and gas sensor to predict the Air Quality Index (AQI) via a […]
I’m still on the project tho where I’ve installed a vibration sensor to monitor industrial machinery using an AVR128DA48 microcontroller. While my basic anomaly detection code is functioning, if (vibration_data […]
I’ve integrated temperature, vibration, and pressure sensors with the AVR128DA48, and have set up CAN Bus communication running Zephyr. Each sensor is connected to a separate CAN node, and data […]
GitHub
