Looking for some help with getting Clock output on MCO1 (PA8) from LSE

Looking for some help with getting Clock output on MCO1 (PA8) from LSE here’s a snippet of what I am doing. My logic analyzer gets no pulse from the LSE. […]

Designing Constant Current (CC) for LiFePO4 Battery Charger

I want to design a charger that charges my lifepo4 battery(4s,3p). The charger is going to be AC to Dc charger having an output of 14.6v 15Amps. My challenge now […]

What Module Can I Use to Measure DC Voltages Up to 40V, or Should I Build a Voltage Divider?

Hello, all. I am doing a project in which I need to measure DC voltage up to 40V. I know that I could do a simple voltmeter using 2 resistors […]

How to optimize PCB design for DRV8320 and STM32G431RBT6TR to minimize vias?

Hey everyone, I’m currently working on a PCB design involving the DRV8320 and the STM32G431RBT6TR. As you can see in the attached images, I’m trying to minimize the number of […]

Handling Disconnections in KiCad with Rat Bites and Conductive Screws

Hi, I’ve got a KiCad project (revised 1-inch-midi) that I’ve been working on that involves 3 boards separated by rat bites. Ground, VCC and two signal pins are passed between […]

Issues with measuring multiple switch inputs via single DAC in R-2R resistor configuration

Working on a project trying to measure multiple switch inputs via a single DAC in an R-2R resistor configuration. Took me a while to realize that the inputs needed to […]

I want to build a 20A power supply

I want to build a 20A power supply

Recommendations for Robust Industrial-Grade Microphone IC with Noise Cancellation for BeagleBone

Hello Guys, I am working on Mic module which is used with beaglebone, The circuit gonna used in robust Industry environment. Recommend me good microphone (ICs) module circuit with noise […]

Is there any founder/maker working on a hardware design which requires high density pcb design ?

Is there any founder/maker working on a hardware design which requires high density pcb design ?