New DevHeads get a 320-point leaderboard boost when joining the DevHeads IoT Integration Community. In addition to learning and advising, active community leaders are rewarded with community recognition and free tech stuff. Start your Legendary Collaboration now!
Hello, I am trying to interface a BME280 sensor with a Raspberry Pi Pico using MicroPython over I2C to monitor environmental conditions such as temperature, humidity, and pressure. However, I […]
This is a vacuum suction motor from vacuum robot that am trying to interface with Raspberry Pi. It has 4 wires and am not able to get it working. Any […]
I have tried to connect Pi camera Rev 1.3 to Pi 4 and software doesn’t have the legacy camera option which used to be there, does any on have solution […]
I’ve written the attach class to get the accelerometer and gyro data from the ICM-20948 unit. Unfortunately the data fluctuates massively when I am trying to do a basic calibration. […]
Hi guys I’m working on a Raspberry Pi project where I need to send sensor data to IoT Hub. Due to latency, I lose around 5 samples per second. I’m […]
Hello, I am trying to interface a BME280 sensor with a Raspberry Pi Pico using MicroPython over I2C to monitor environmental conditions such as temperature, humidity, and pressure. However, I […]
Hello.I have a simple robot with two DC motors. Using the L298N Dual H-Bridge, what’s the minimum number of control pins I can use to give me forward, back and […]
I have tried to connect Pi camera Rev 1.3 to Pi 4 and software doesn’t have the legacy camera option which used to be there, does any on have solution […]
I’ve written the attach class to get the accelerometer and gyro data from the ICM-20948 unit. Unfortunately the data fluctuates massively when I am trying to do a basic calibration. […]
